Ar-M[e]ind Blog

1. Bagaimana gambaran informasi yang terkandung dalam BPDU yang digunakan oleh switch? (Pilih dua)• to determine which ports are placed in forwarding mode • to determine the root bridge • to set the duplex mode of a redundant link • to activate looped paths throughout the network • to prevent loops

Step 1: Perform a Skills Strength and Interest AssessmentSeveral career paths are available for individuals interested in an IT career. If you have not alreadyparticipated in a strength and interest assessment, or if you have not yet determined which career path is of interest to you, research some

Task 1: Prepare for the Presentation Step 1: Review the contenta. Ensure that your presentation is complete.b. Review the content to ensure that there are no technical errors.c. Rehearse the presentation to become familiar with the flow of the content and develop a sense of the timing required. Step

Task 1: Compile the Project Proposal Step 1: Finalize the documentation requirementsa. Finalize the documentation created in the previous labs and in your project portfolio.b. Insert and compile the information under the following headings:Executive Summary Network Requirements Current Network Environment Proposed

Step 1: List the items requireda. Use the table below, or create a similar one, to list all the items and equipment that need to be purchased for the FilmCompany network upgrade project.b. Search the Internet or use information provided by your instructor to add possible suppliers or vendors to the

Step 1: List and prioritize the tasks that require downtime on the current networkList the tasks that require network downtime. Step 2: Document the required downtime on the project timelineSometimes it is not possible to complete all of the required tasks during an approved maintenance window. If an

Step 1: List and prioritize the factors affecting the timelineNote issues such as equipment and material availability, skilled personnel, and customer requirements that should be considered for the following factors when developing a project timeline. Consider the possibility that the project might

Step 1: Compare the installation methodsThere are three possible installation methods:New installation, commonly referred to as a green field installation Phased installation into an existing, functioning network Complete replacement, commonly referred to as a fork-lift upgrade Consider

Step 1: Determine the tasks to implement the network designImplementing a network design requires the completion of a set of tasks, such as installing hardware,configuring systems, testing the network, and launching the network into production. Each task consists of several steps.Each task requires

Step 1: Collate and organize the informationa. Gather and read through all the project documents that you created in previous labs.b. Ensure that multipage documents are together and that the pages are in the correct sequence. Step 2: Review the existing informationEnsure that the documents are complete

Step 1: Review the VPN Design Test PlanReview the VPN Design Test Plan. Note the tests that the designer indicates are necessary to perform using the prototype network. Test 1: Description and purpose:EasyVPN Server Setup Verifikasi Test 2: Description and purpose:Konektivitas Test Klien VPN Step

Step 1: Identify if weaknesses are present in the designIs the Frame Relay WAN design able to scale to meet the expected growth?Ya, layanan Frame Relay biasanya sangat terukur. CIR tambahan dapat dibeli dan sirkuit tambahan dapat ditambahkan jika diperlukan. Do the results of the prototype test indicate

Task 1: Build the Network. Task CompleteStep 1 Connect devicesa. Connect the routers as shown in the topology diagram. Refer to the Test Plan in Lab 8.2.2 for cabling required.b. For each of the routers to be configured, use the erase startup-config and the reload commands from the privileged EXEC prompt,

Task 1: Review the Supporting Documentation Step 1: Refer to the WAN Design Test Plan document provided for this labDownload the WAN Design Test Plan. What is the purpose of this WAN design test? Which elementsof the design will be tested using this plan?The purpose of this prototype is to demonstrate

Step 1: Connect the PCs to the router console portsa. Referring to the topology diagram, connect a console cable from PC1 to the console port on R1. Connect a console cable from PC2 to the console port on R2.b. Apply power to all PCs and routers.c. Open a HyperTerminal session on each PC and establish

Task 1: Identify areas of risk and weakness in the server farm implementation Step 1: Analyze the physical topologyExamine the server farm topology as one entity and as a part of the entire FilmCompany topology. Look for each of the risks and weaknesses listed in the chart. Describe the devices,

Task 1: Assemble and connect component devices Step 1: Review the Topology Diagram and the Equipment section of the test plana. Determine which equipment or suitable substitutes will be required to meet the objectives of the lab.b. Modify the topology diagram as necessary to fit available equipment. Step